造價通
更新時間：2024.12.28
人工林杉木板材高溫和常溫組合干燥研究

格式：pdf

大?。?span class="single-tag-height">545KB

頁數： 4頁

In this paper, a technique with combination of normal temperature drying and high temperature drying technology was introduced to dry Chinese Fir plantation board, the result with more than one year's researching showed that, the lumber dimension stability after drying was best when dried in combination method, and second when dried in normal temperature kiln while the worst in airdry. Meanwhile, the result also showed that not only was dimension stability increased but also the density of fir was increased, this fact made plantation fir a excellent material in furniture and interior decoration field. So primary conclusion was got that this combining way was considered one kind of lower drying cost, simple way and effective drying methods.

不同固含量低分子酚醛樹脂浸漬改性杉木板材性能的研究

格式：pdf

大小：341KB

頁數： 5頁

為改善杉木的物理力學性能,采用真空-加壓浸漬工藝,對速生杉木進行低分子酚醛樹脂增強改性處理,分析不同樹脂增重率對改性杉木性能的影響,以及樹脂在木材長度和厚度方向上的分布特點。結果表明,杉木經過固含量為10%、20%、30%的酚醛樹脂浸漬處理后,其尺寸穩定性隨樹脂固含量的增加逐漸提高,靜曲強度由64.5 MPa提高至75.0 MPa,彈性模量和表面硬度分別提高了6.1%、27.5%、48.2%和29.8%、63.1%、73.8%,但沖擊韌性隨著樹脂增重率的增加而逐漸降低;樹脂在木材長度方向上分布均勻,在厚度方向上木材表面多于其內部。

熱門知識

一等杉木板材

精華知識

一等杉木板材

最新知識

一等杉木板材
點擊加載更多>>

相關問答

一等杉木板材
點擊加載更多>>
專題概述
一等杉木板材相關專題

分類檢索：