止回閥標準匯總

標準編號 標準中文名稱 標準英文名稱 DIN 3269-1-1988 地段和建筑物內飲水裝置用管件.止回閥PN10.要求 (Valves for domestic drinking water installations; check valves PN 10; requirements) DIN 87101-1975 垂直型.公稱寬度50-150.公稱壓力1.自閉式止回閥.符合公稱壓力的法蘭連接 (Non-return flaps (storm valves), self-closing, vertical type, nominal diameter 50 up to 150, nominal pressure 1; mating dimensions for flanges according to nominal pressure 10) DIN 3441-5-1984 非增塑聚氯乙烯管件.壓緊止回閥PN6和PN10.尺寸 (Unplasticized polyvinyl chloride (PVC-U) valves; PN 6 and PN 10 wafer type butterfly valves; dimensions) DIN 87104-1975 DIN87101止回閥用閥插入件 (Flap Inserts for Non-return Flaps in accordance with DIN 87101) DIN 3247-1985 無止回閥.帶法蘭的吸濾器 (Flanged suction strainers without non-return valve) DIN 87106-1975 DIN87101止回閥用定位裝置 (Locking Devices for Non-return Flaps in accordance with DIN 87101) DIN 3259-1985 帶止回閥的法蘭吸濾器(腳閥) (Flanged suction strainers with non-return valve) DIN 477-4-1982 氣瓶閥.輕便儲氣瓶頸的止回閥 (Compressed gas cylinder valves; swing check valves for camping-cylinders) DIN 3538-1986 煤氣裝置管件.止回閥.內螺紋接頭 (Valves for gas installations; butterfly valves; female threaded ends) DIN 3248-1985 無止回閥.帶內螺紋連接的吸濾器 (Threaded suction strainers without non-return valve) DIN 3249-1985 帶止回閥.內螺紋連接的吸濾器(腳閥) (Threaded suction strainers with non-return valve) DIN EN 1074-3-2000 供水用閥門.適用性要求和專用檢查試驗.第3部分:止回閥 (Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves; German version EN 1074-3:2000) DIN 74280-1998 空氣制動系統.止回閥 (Air braking systems - Check valve) DIN EN 13709-2003 工業用閥.鋼制球閥、球狀截止閥和止回閥 (Industrial valves - Steel globe and globe stop and check valves; German version EN 13709:2002) DIN 3845-1981 暖氣管件.帶套管接頭的銅合金制PN16止回閥.尺寸.材料 (Valves for heating installations - Copper alloy check valves PN 16 with screwed sockets - Dimensions, materials) DIN EN 12094-13-2001 固定式消防系統.氣體滅火系統用元件.第13部分:止回閥和非止回閥的要求和試驗方法 (Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves; German version EN 12094-13:2001) DIN 86066-2002 止回閥用鑄鋼焊入式彎頭.DN50至150,PN10的法蘭接合 (Cast steel welding elbows for storm valves - DN 50 to 150, connecting dimensions according to PN 10) DIN 58362-7-2002 輸液.輸液器和附件.第7部分:止回閥 (Infusion - Infusion equipment and accessories - Part 7: Check valves) DIN EN ISO 15761-2003 石油和天然氣工業用規格為DN100及更小的鋼閘閥、球閥和止回閥 (Steel gate, glob and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002); German version EN ISO 15761:2002 (German and English text)) DIN 87107-1975 DIN87101止回閥用扁墊圈 (Gaskets for Non-return Flaps in accordance with DIN 87101) DIN 87103-1975 DIN87101止回閥的罩蓋 (Covers for Non-return Flaps in accordance with DIN 87101) DIN 87102-1975 DIN87101止回閥的外殼 (Casings for Non-return Flaps in accordance with DIN 87101) DIN 87105-1975 DIN87101止回閥用帶凸肩的閉鎖螺釘 (Screw Plugs with Cylindrical Extension for Non-return Flaps in accordance with DIN 87101) DL/T923-2005 火力發電用止回閥技術條件 　 GB/T1855-1993 船用法蘭鑄鐵單排吸入截止止回閥箱 Marine flanged cast iron single arrangement suctio stop check box valve GB/T1853-1994 船用法蘭鑄鋼舷側截止止回閥 Marine flanged cast steel over board stop check valve UL 1469-1995 回流專用止回閥的閥身強度和液壓損失率檢驗 (Strength of body and hydraulic pressure loss testing of backflow special check valves ) JIS F7372-1996 造船.鑄鐵5K回轉式止回閥 (Shipbuilding -- Cast iron 5K swing check valves) JIS F3058-1996 鑄鋼立式波浪止回閥 (CAST STEEL VERTICAL STORM VALVES) JIS F7356-1996 造船.青銅5K升降止回閥 (Shipbuilding -- Bronze 5K lift check valves) JIS F7373-1996 造船.鑄鐵10K回轉式止回閥 (Shipbuilding -- Cast iron 10K swing check valves) JIS F7371-1996 造船.青銅5K回轉止回閥 (Shipbuilding -- Bronze 5K swing check valves) JIS F7495-2000 造船.球墨鑄鐵10K旋壓止回閥 (Shipbuilding -- Spheroidal graphite iron (ductile iron) 10K screw-down check globe valves) JIS F3060-1996 鑄鋼旋壓立式波浪止回閥 (CAST STEEL SCREWDOWN VERTICAL STORM VALVES) JIS B8664-2001 液壓動力.壓力控制閥(不包括減壓閥)、順序活門、釋荷閥、節流閥和止回閥.安裝表面 (Hydraulic fluid power -- Pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces) ISO 9952-1993 農業灌溉設備.止回閥 (Agricultural irrigation equipment; check valves) ISO 15761-2002 石油和天然氣工業用尺寸為DN 100及更小的鋼閘閥、球閥和止回閥 (Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries) ISO 15500-3-2001 道路車輛.壓縮天然氣(CNG)燃料系統元部件.第3部分:止回閥 (Road vehicles - Compressed natural gas (CNG) fuel system components - Part 3: Check valve) ISO 5781-2000 液壓傳動.減壓閥、順序閥、卸荷閥、節流閥和止回閥.裝配面 (Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces) SY/T5215-2005 鉆具止回閥 　 產品推薦