DL/T 507—2014 水輪發電機組啟動試驗規程（英文版）

Foreword

1 Scope

2 Normative References

3 General Provisions

4 Inspection before Start-up Test

5 Water Filling Test

6 Start-up and No-load Test

7 Test of Generator with Main Transformer and HV Switchgear

8 Synchronization and Loading Test

9 72h Continuous Test Run with Load

10 Handover and Putting into Commercial Operation

Appendix A （Informative） Recording Form for Load Shedding Test

Appendix B （Informative） List of Documents to be Handed over for Acceptance of Unit Start-up

Test Run

References2100433B

This standard is prepared in accordance with Notzjication on the development and revision plan of the secondbatch energy industrial standards in 2011 issued by National Energy Administration [GNKJ （2011）No.252].

This standard is structured and organized in accordance with Standard GB/T 1.1-2009 Directives for standardization-Part 1： Structure and drafting of standards.

The standard is a revision to standard DL/T 507-2002 Start-up test code for hydro-generating units （hereinafter referred to as the previous standard）. Compared with the previous standard， the main technical changes include：

——Revised the limit on run-out （peak-to-peak value） for unit operation.

——Revised allowable values of horizontal and vertical vibration （peak-to-peak value） of turbine head cover with rated speed greater than 375 rpm to 750 rpm and allowable value of horizontal vibration （peak-to-peak value） of the frame at stator core， and added explanation on the characteristics of allowable values.

——Explained in details the parameter adjustment test for service water supply； and explained in details the short-circuit test for station service transformer by means ofhydro-generating units.

——Added test on injection-type ground protection of hydro-generating units.

——Revised loading and load shedding test of hydro-generating units； and added test on thermal stability of hydro-generating units.

——Clarified requirements for test on dynamic water closing service gate or inlet valve of turbine and test on closing ring gate ofhydro-generating units.

——Added requirements on simultaneous'load shedding test of multiple generating units that share a single waterway.

——Cancelled the requirement for 30-day comnussioning.

《水輪發電機組啟動試驗規程(DL/T507－2002)(英文版)》是由中國電力出版社出版的。

內容簡介

《DL/T827-2002 燈泡貫流式水輪發電機組啟動試驗規程(英文版)》是根據國家經濟貿易委員會電力司《關于確認1999年度電力行業標準制修訂計劃項目的通知》（電力[2000]22號文）的計劃安排制定。

我國大中型燈泡貫流式水輪發電機組（以下簡稱“燈泡貫流式機組”或“機組”）發展迅速，自20世紀80年代初起步至90年代，已建成馬跡塘、百龍灘、凌津?yàn)⒋笤炊?、貴港、飛來峽等安裝有大型燈泡貫流式機組的水電站近40座。

但在機組啟動驗收方向一直參考DL507-1993《水輪發電機組起》動試驗規程，而沒有統一的標準。由于燈泡貫流式機組自身的特點，給機組的啟動試驗和交換驗收工作帶來不便。

本標準的編寫主要總結了國內已建和在建水電站的燈泡貫流式機組啟動試運行試驗的經驗，參考了DL/T507-2002標準，并吸收了國外引進設備中的相關技術要求。

通過本標準的實施，以規范燈泡貫流式機組的啟動試驗程序，統一相應的專業用語和俗稱，指導燈泡貫流式機組的啟動試驗和交接驗收工。

本標準是對DL/T507-2002標準的補充，是國家電力基本建設施工中燈泡貫流式機組成套設備啟套設備啟動試運行試驗的依據，也是機組投產移交考核的主要內容。

本標準的附錄A為資料性附錄。

本標準由電力行業水電站水輪發電機標準化技術委員會提出并歸口。

2100433B