硅片插片機

1．外殼均采用304不銹鋼材料制作，表面磨光處理。外觀簡潔、流暢。

The machine enclosure is made of 304 stainless steel and its surface is polished, the machine appearance is compact and smooth.

2．工作機器支架及硅片盒夾具均采用耐腐蝕、經特殊亞光電化學處理的不銹鋼材料。

work head and silicon chip box fixture are both used the anti-corrosive stainless steel which is treated by special sub-photoelectric chemistry

3．設備配置：磁力驅動循環水泵，水箱總?cè)莘e0.3m3,硅片水床滑臺，滾珠絲桿傳動三工位升降花籃座，三菱高分辨率MR-J2S系列伺服電機，三菱可編程序控制器、Autonics傳感器，eao按鈕。

The machine configuration: cycling water pump driven by magnetic force, water tank capacity 0.3 m3 , silicon chip water-bed sliding table, three-workstation basket fixture lifted by ball screw, Mitsubishi MR-J2S servo motor with high resolution, Mitsubishi PLC, Autonics sensor and EAO press button

4．125mm-156mm硅片通用，節拍40-60片/min。

the machine working range: 125mm-156mm silicon chips, cycle time 40-60 chips/min

5. 手動調整，自動排片（需人工上料）.

manual adjustment and auto tiering chip (loading by manual)

6. 設備全封閉設計，美觀大方；一體式組合腳輪，定位、移動兩便。

fully enclosed design, integrated truckle is easy to move and fix

7. 管路、水過濾器及閥門等管件均采用304不銹鋼材料。

pipeline and water filter and valve are all adopted 304 stainless steel

1． 無污染物排放。

no pollution draining

2. 電源采用單相三線制，機器必須接地（PE）。

power supply adopt single phase 3 line system, the machine must be ground(PE).

3. 機、機電安全互鎖。

the mechanism, mechanism and electricity safe interlock

1．電器傳動系統采用PLC可編程控制器及高分辨率伺服電機；機械傳動采用直線軸承滑塊、直線軸及滾珠絲桿副，結構簡潔，運動精度高。

the electric transmission is through PLC controller and high resolution servo motor; the mechanical transmission is through linear bearing sliding block, shaft and ball screw pair, its structure is compact and movement accuracy is high

2．花籃就位檢測，排片滯留報警；可防止碎片和放發生故障。

basket fixture positioning check and tiering chip error alarm, which prevent fragments from causing fault

3．快換花籃治具，適應隨時更換產品；水床滑臺、水流助推提高排片可靠性。

fast changing basket fixture, it’s suitable to change chips; water-bed sliding table is reliable by water flow boosting

4. 產品執行標準：符合國家相關工業技術標準。

the machine implement criterion which comply with related industry technology criterion.